NEWS
Key Process Considerations for High-Frequency, High-Speed Hydrocarbon Resin PCB Manufacturing
Release time:
2025-10-21
Although high-frequency, high-speed hydrocarbon resins offer excellent process adaptability, achieving optimal results still requires particular attention to critical steps such as lamination and drilling. A deep understanding and mastery of these fundamental processes are key to ensuring high yield and high-performance production.
Selecting an exceptional high-frequency material is only half the battle. The core challenge for every process engineer is how to fully unlock the material's inherent potential through optimized high-frequency PCB manufacturing processes, translating it into outstanding performance in the final product. While high-frequency, high-speed hydrocarbon resins offer excellent process adaptability, achieving optimal results still requires special attention to critical steps like lamination and drilling. Understanding and mastering these process fundamentals is essential for achieving high yield and high-performance production.
I. Storage and Pre-Treatment: Laying the Foundation
Despite the extremely low moisture absorption of high-performance hydrocarbon resins, any trace moisture should be treated as a potential risk prior to precision processing. Therefore, raw materials should be stored in a cool, dry, and light-protected environment. Prior to use, especially for materials stored for extended periods after opening, performing an appropriate pre-bake (typically 1-2 hours at 100-120°C) is highly recommended. This step thoroughly removes any adsorbed surface moisture, providing the optimal initial state for subsequent lamination. It effectively prevents potential issues like internal bubbles or delamination caused by rapid vaporization of trapped moisture during high-temperature processing.
II. Laminating Cycle: Perfect Fusion Through Precise Control
Laminating is the core process that gives life to multilayer board structures. For high-frequency, high-speed hydrocarbon resins, the optimization goal of the laminating cycle is to ensure complete resin flow, filling all circuit gaps and expelling internal air, while avoiding over-curing or thermal decomposition.
• Heating Rate: Avoid excessive speed. A gradual heating curve allows sufficient time for resin flow and wetting after reaching the melting point, particularly in areas with dense inner layer traces.
• Pressure Curve: Must precisely match the temperature curve and resin flow characteristics. Multi-stage pressurization is typically employed, applying full pressure during the resin's peak flow phase to ensure optimal filling and uniform board thickness.
• Holding Pressure Time and Temperature: Strict adherence to the material supplier's technical specifications is essential to achieve optimal resin cross-linking and curing. Insufficient curing leads to soft boards and reduced heat resistance; over-curing may cause brittleness, affecting subsequent processes.
III. Drilling Parameters: Details Determine Hole Wall Quality
Numerous signal vias in high-frequency circuits are critical for interlayer interconnections. A smooth, burr-free hole wall is essential for subsequent high-quality electroplating.
• Drill Selection: It is strongly recommended to use new or sharp specialized drills. While hydrocarbon resins are not as soft and prone to sticking as PTFE, their high cross-linking density still causes drill wear. Sharp tools enable cleaner cutting, reducing hole wall tearing and thermal effects.
• Drilling Parameters: Optimize rotational speed (RPM) and feed rate. Proper parameter combinations maximize efficiency while minimizing heat generated by drilling friction, preventing resin softening and “drill fouling.” Higher RPMs paired with moderate feed rates are typically recommended.
Mastering these critical aspects of high-frequency PCB manufacturing enables manufacturers to consistently translate the superior electrical properties of high-frequency, high-speed hydrocarbon resins into reliable, uniform end products. This capability allows them to stand out in competitive markets through exceptional quality and yield rates.
NEWS
As 5G‑A, 6G communications, and AI‑driven high‑performance servers surge forward, high‑frequency, high‑speed copper-clad laminates (CCL) and advanced semiconductor packaging are confronting unprecedented signal‑loss challenges. To achieve ultra‑low loss at GHz‑ and even THz‑range frequencies, the molecular‑level design of materials is of paramount importance. Among these considerations, “hydrocarbon resins”—the key metrics for assessing a material’s non‑polar purity and dielectric performance—are emerging as pivotal components in formulation development.
2026-06-24
Why can’t polymer materials do without crosslinking agents?
In the formulation development of polymer materials, rubbers, coatings, and adhesives, crosslinking agents are widely recognized as the core functional components that impart a “second life” to the material. Without crosslinking, the base resin exhibits linear or branched molecular chains, which readily undergo slippage and deformation under heat or mechanical stress, potentially leading to irreversible melting.
2026-06-22
In the modification of polymeric materials, the fabrication of composite materials, and the formulation of coatings and adhesives, coupling agents serve as a “chemical bridge” that links inorganic and organic interfaces, underscoring their indispensable importance.
2026-06-18
Chemical Classification, Fire‑Retardant Mechanisms, and Core Applications of Flame Retardants
In our daily lives, plastic products, electronic and electrical devices, automotive interiors, and towering skyscrapers are ubiquitous. These modern materials, which have greatly enhanced the convenience of our everyday existence, often share a critical physical hazard: they are highly flammable. To mitigate fire risks at their source and safeguard lives and property, a class of fine chemical additives known as flame retardants has been developed.
2026-06-16
With the explosive deployment of 5G‑A, 6G communications, and AI computing centers, the electronic information industry has set unprecedentedly stringent requirements for data transmission rates and signal loss. At the hardware level, copper-clad laminates (CCL) and advanced packaging materials—key carriers of electrical signals—are undergoing a profound materials revolution. Against this backdrop, hydrocarbon resins, owing to their exceptionally superior dielectric properties, have firmly established themselves as a critical enabler of next‑generation high‑frequency, high‑speed electronic substrates.
2026-06-12
The Function and Application of Crosslinking Agents
In polymer materials, the rubber industry, coatings, and adhesive formulations, crosslinking agents play a decisive “turning stone into gold” role. Polymers that have not undergone crosslinking typically exhibit softness, are easily stretched and deformed, and struggle to withstand the corrosive effects of solvents and high temperatures. By chemically tuning the system with crosslinking agents, materials can achieve remarkable improvements in performance.
2026-06-10
CONTACT US
Surface Engineering Materials Division
Printing and Packaging Materials Division
Wechat：Desytek-
Add : No. 149, Olympic Sports Avenue, Tieshan District, Huangshi Development Zone, Hubei Province
MESSAGE
